10.2KW 8200W 10200W On and Off Grid Dual MPPT Solar Inverter Hybrid 160A 230V Pure Sine Wave DC 48V for Battery Charger

Model	SCI-MAX-10200
RATED POWER	10200W
Maximum PV Input Power	10800W

GRID-TIED OPERATION

PV INPUT (DC)

Nominal DC Voltage/Maximum DC Voltage	360VDC/500VDC
Start-up Voltage/Initial Feeding Voltage	90VDC/120VDC
MPPT DC Voltage Range	90-450VDC

Number of MPPT Trackers/Maximum Input Current

2/18A

GRID OUTPUT (AC)

Nominal AC Output Voltage	220/230/240VAC
AC Output Voltage Range	195.5-253VAC
Power Factor	>0.99
Feed-in Grid Frequency Range	49-51±1Hz / 59-61±1Hz

Nominal Output Current

44.3A

EFFICIENCY

Maximum Conversion Efficiency (Solar to AC)

98%

TWO LOADS OUTPUT POWER

Full Load	10200W
Maximum Main Load	10200W
Maximum Second Load (battery mode)(Only if the battery voltage is below 44V)	3400W
Main Load Cut Off Voltage	44VDC
Main Load Return Voltage	48VDC

OFF-GRID OPERATION

AC Start-up Voltage/Auto Restart Voltage	120-140VAC/180VAC
Acceptable Input Voltage Range	90-280VAC or 170-280VAC

Maximum AC Input Current

50A

Nominal Operating Frequency

50/60Hz

Surge Power

20400W

BATTERY MODE OUTPUT (AC)

Nominal Output Voltage	220/230/240VAC
Output Waveform	Pure sine wave
Efficiency (DC to AC)	94%

BATTERY & CHARGER

Nominal DC Voltage	48VDC
Maximum Charging Current(Solar to AC)	160A
Maximum AC Charging Current	160A

GENERAL

Communication interface	WIFI
Humidity	5% to 95% Relative Humidity (Non-condensing)
Operating Temperature	–10°C – 50°C
Storage Temperature	–15°C – 60°C

 

Note:

1: Orders from EU buyers are prioritized for shipment from EU warehouses. Expected delivery time is 3 to 7 days.

2: Free return and refund service, return to local warehouse in the European Union

3: Buyer protection for over 90 days

4: Provide a two-year warranty period

5: If you have any questions, please contact us and we can provide technical support

(Excluding Ukraine, Ukrainian customers need to ship from EU warehouses. Please contact us.)

FAQ:

Q:Whether it can be connected to the grid?

A:PV gives priority to power supply to the load, and extra to charge the battery, and more can be integrated into the grid (need to be based on local government policies)

Q: Is it possible to use PV, battery, grid supply at the same time?

A: YES. The default PV priority mode, when the PV input is insufficient, the battery and utility will be used.

Q: Can inverters be connected in series or parallel?

A: NO.

Q: Can it be used in air conditioners, water pumps, and wind turbines?

A: It can be used in air conditioners, but not in water pumps and wind turbines.

Q: How to choose the power of the inverter according to the household appliances?

A: If household appliances contain inductive load appliances, such as refrigerators, washing machines, air conditioners, etc., the power of the inverter is at least three times the total power of the inductive load appliances, otherwise the appliances may not be able to start.

Inverter Use Notice
1. The starting power of inductive load electrical appliances shall be at least three times of the rated power of the electrical appliances. If the starting power exceeds the inverter power, the inverter may be damaged. Please select a suitable model before purchasing.
2. Please connect the circuit correctly according to the instructions, and install switches for each circuit.
3. Starting sequence: first turn on the battery switch, start the inverter, and turn on the PV, mains and load switches.
4. Shutdown sequence: turn off the switches of load, PV and mains, turn off the inverter, and finally turn off the battery.