Bicycle Burglar Alarm Taillight Waterproof Smart Auto Brake Sensing Tail Lamp Remote Control USB Charge Bike Rear Light

Please refer to this video for the connection method between the tail lights and horn

Feature :

● Taillight/Brake light/Anti-theft alarm/Bike bell 4-in-1 function!

● Reminding the surrounding pedestrians and drivers with light and sound warning, effectively protect the safety of the car and the rider!

● Warning light will automatically light up when passing through a tunnel or during the night rides!

● Brake light will, be highlighted immediately when you brake or slow down!

● Arming when parking, deterring thieves and protect your car effectively by loud alarm sound and blink light!

● PC+ anti-UV material, waterproof and dustproof, high and low temperature resistance, not afraid of wind, rain and severe cold and heat!

Product Parameter:

1 .Alarm Battery : 4.2V 700mAh lithium battery, working time about 1-3 months, standby time about 6 months.

2. Alarm Charge Port: Standard USB-C 5V (some quick chargers may not be compatible)

3. Remote Battery: WLO3C: 27A(12V) Alkaline battery, working time about 1-2 years (5 times per day)

4. Working Frequency: 433.92MHz

5. Working Environment Temperature: -40 ~ +70℃

6. Working Environment Humidity: <80%

7 .Storage Temperature: -40 ~ +70 ℃

Low Battery Warning & Charging:

1. Check whether the remote control indicator can light up. If not or light weak, please replace the remote control battery.

2. The alarm is in low power consumption mode when you receive. In this mode, remote can not control the alarm. Please charge the alarm at least 1 minute to activate before use, otherwise remote can’t control the alarm.

3.If alarm have been charged and activated, remote still doesn’ t work, please pair the remote and alarm again. The pairing method please see 3.3.

Multifunctional Taillight and Smart Brake Function

1. Taillight Mode Button: In DISARM mode, press [⚡] taillight mode button on remote select light mode, it has 5 light modes:Slow Flashing /Breathing/ Blinking/ Steady Light/OFF

2. Many users like intelligent auto modes, the "Slow Flashing" mode and the "Breathing" mode. The alarm taillight will light up for 30s and then automatically detect the brightness of the riding environment, turn off when it is bright, and turn on when it is dark. In a dark environment, if you stop for more than 30 seconds, it will automatically turn off to save power; if you ride again, it will automatically light up.

3. If you don’t want intelligent auto modes, you can select "Blinking" and "Steady Light" while riding. These 2 modes will not be affected by environmental brightness and any vibrations.

4. When the alarm taillight turns on, if there is a brake action while riding, the taillights will be highlighted in red for 2 seconds to remind other drivers, and then return to the previous state.

110dB Loud Alarm,Bike Taillight With Alarm，it can be used either as an alarm or as a tail light

Alarms can be installed in many places. Bicycles, motorcycles, scooter, etc…
Remote control wireless find bike

The remote controller can remotely control the alarm, and the maximum distance must be kept within 20 meters.

Bracket, tie, double-sided tape, 3 installation methods without wiring, suitable for various models!PC + UV resistant material, IP54 waterproof and dustproof, high and low temperature resistance, not afraid of wind and rain, cold and heat.
Use the supporting USB charging cable and connect the mobile phone 5-volt charging head (not included). Some fast charging heads are incompatible.

7 Levels Sensitivity Adjustment 

Easy To InstallOne alarm can pair up to 8 remotes